Search:

I am trying to wire the windshield wiper motor back 1960 b100
On truck I got it has 3 wires green black and white.
Anyone know how I should wire it to test see if it even works.
Thankszn

anyone done a different engine /tranny swap for a 1960 1/2 ton. cant find oversize pistons for the bd220 which needs to be bored.
thanks!!

i have a 1960 b100 with bd220 going to need to be bored.
having trouble even finding pistons.
is there other engines that will bolt to the existing 3 speed.??
i also have a complete chevy 235 with...

i have abox of rings that say bd220 173 155 R91 number one.
6 23 61 man date ??
are these standard size ?? or .010 over

anyone know best source for pistons 1960 bd220??
i took pistons out put new rings getting about 50 lbs compression
not enought to start. the other rings were all seized pretty bad.
was that a bad...

took out my front leaf spring bushings. the bolt is special anyone know where to get replacement ??
it presses in similar to a lug bolt and has a shoulder so uses no metal bushing inside the rubber....

i have located 1 1962 pickup to get windshield out of for my 1960.
and is to far off to have glass shop remove.anyone have any ideas for me to
remove it without breaking??? never done it. I will...

I have located what appears to be a 1961 or 1962 pickup.via photo several hundred miles away.
Is the hood emblem the same.
windshield.
leaf springs
as I am needing for my 1960 B100.
any help...

the book shows a 2peice seal installed in the rear main cap.
Is there any tricks to replacing the top half. I have amanual but
shows fitting it with crank out.

anyone out there know what other years or if travelall or scout front bumpers
were the same for the pickup ??trying to increase my odds of finding one
up hear in alaska.

got into my 1960 b102 with bd220.
5 pistons are cast with 4033 IH.on side
and 172413-R1 735 cam Z20 stamped on top.
1 only has std-s stamped on top.
the 5 take 2 1/8 rings and a larger oil...

thanks where did you find the compression specs ??

just did a compression check on 1960 bd220. shows 25 to 50 spi on all cylinders.
have a service manual but cant find proper compression ??

anyone know the proper cap numbers carquest or napa for this dist. delco 1119355
i have some RR162 napa elchin that came with truck but I think they are wrong ??
as the rotor that matches it...

i have a new set of champion J-10Y plugs that were laying in the truck 1960 b102
220BD engine. are these the propere ones cant find info online.

anyone know the gates numbers or others or where I can get radiator hoses
mail order ??? having a hard time locating.thanks

wondering if it is worth it if I port polish intake and or exqaust myself
if would gain any HP or any other mods on a 220BD on a 1960 B102 pickup.

is there a better carb to put on the bd220???other than the original.

i have a 1960 b102 with 220 bd engine.
anyone know where i can get electronic ignition for it.

I just bought a stepside international pickup bed trailer to use bed(photo attached)
year unknown to put on the 1960 b102 I bought.
however now I have unbolted it from frame which is a lot...

anyone know where I can get door hinge pins for 1960 b100.
thanks

where can I get a engine shop manual for BD220 in my 1960 B100
in meantime does anyone know torque sequence to put head back on
and valve settings. pulled the head and cleaned all the carbon...

anyone know appox how many rpms a good working starter
should turn over the engine 220 BD 1960 when I have plugs out.
say I put a chalk mark on front pully as I have grill off.
It is cold about...