Results 1 to 4 of 4

Thread: fuel filler neck

  1. #1

    Default fuel filler neck

    has anybody found the filler necks for a 71 scout 800b for less than $70 a piece

  2. #2
    Join Date
    Jun 2009
    Location
    Maryland
    Posts
    145

    Default filler neck

    Brendan Barnes (Barnes IH Sales) is manufacturing a stainless steel neck that bolts to the outside of the 1/4 and uses a short piece of marine grade fuel hose to connect to the tank. Last time I checked the steel neck was $25 and you needed to source your own hose. Marine grade hose is expensive but you could likely get 2 sides out of 1', which might cost you $20. So, you could get 2 sides done for the cost of one stock rubber neck. I do not know if there is a provision for the tank vent, but that is an easy operation. I do know that the stock filler and Barnes' aftermarket necks will not work for the 61-62 tanks which have a different angle and require a different part.

  3. #3

    Default

    i googled barnes ih sales and all i found was an ebay site but it didnt have the neck

  4. #4
    Join Date
    Jun 2009
    Location
    Maryland
    Posts
    145

    Default

    Brendan Barnes 610-620-4524

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •