Results 1 to 2 of 2

Thread: Parts Needed Dana 44 Spindle

  1. #1
    Join Date
    Oct 2009
    Posts
    18

    Default Parts Needed Dana 44 Spindle

    I need a spindle off a Dana 44. Mine is toast. The vehicle is a 1980 Scout II. I also need the two outer nuts, one is normal, the other has the 3 alan screws. Please email or post if you have something. Thanks!

    Jim

    ledbelly31@msn.com

  2. #2
    Join Date
    Apr 2009
    Location
    San Luis Obispo, California
    Posts
    283

    Default

    Heres a spindle, costs about 140$ tho with a new bearing.

    http://www.shopih.com/YAW-38105-p-SH.html




    Heres lock nuts, they are a good deal only 10$

    http://www.shopih.com/DAN-28068X-p-SH.html


    Hope that helps
    -Mike
    -72 Scout2 - SBC350 with RV camshaft, 4 speed manual Trans, D20 xfer case with CV drive shafts.
    -Dana 44 Detroit locker rear.
    -Dana 44 (out of a 75) Rebuilt /w trutrac limited slip frnt



    ~Conquest is not in our principles. It is inconsistent with our government.

    ~T.J.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •