Results 1 to 2 of 2

Thread: Hello from NE Ohio

  1. #1
    Join Date
    Nov 2009
    Location
    Alliance, OH
    Posts
    4

    Default Hello from NE Ohio

    Hello, i am new here, picked up a 74 Scout II, has balanced and blueprinted 345, bored 30 over with mild cam less than 1k on motor, Holly 4 barrel in-front of a 727 auto with the single speed T-case ..

    i would like to swap the T-case out for a D300 or a 20 witch ever i find at the right price..prefer D300 ..

    is there anything specific i need to do for the swap ?

    i know it has to be from a IH with the Texas bolt pattern, is there anything else and is it a straight forward swap ?

    or will i have to change the cross member and so on ?

  2. #2
    Join Date
    Jun 2009
    Location
    Hurlburt Field, FL
    Posts
    495

    Default

    I would imagine you'd have to change out the main "bull gear" on the back of the tranny to mate up with the new transfer case. You shouldn't have to change the cross member though; it bolts to the transmission, not the transfer case. Not sure of driveshaft length either...

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •