Results 1 to 5 of 5

Thread: carb kick down

  1. #1
    Join Date
    Feb 2009
    Location
    eastern washington state
    Posts
    427

    Default carb kick down

    put a holley 2300 on my 345 automatic took off 2245 now kickdown is to short. how do i fix this.

  2. #2
    Join Date
    Feb 2009
    Location
    Paso Robles, Ca
    Posts
    63

    Default

    The mount/connection for the kickdown spins for adjustment.
    Just spin in out until it meets the mount point and adjust as needed. Make sure you check the operation with everything off in a safe area...

  3. #3
    Join Date
    Feb 2009
    Location
    eastern washington state
    Posts
    427

    Default

    thanks i really don't want to do that if i thread it out for adjustment the rod will be off and i really don't want to bend it.

  4. #4
    Join Date
    Feb 2009
    Location
    Paso Robles, Ca
    Posts
    63

    Default

    have you thought about an extention?
    if you goto your local hardware store with the end, you cou get a sleve with the same threads and shaft that is straight and use it as an extention.

  5. #5
    Join Date
    Feb 2009
    Location
    eastern washington state
    Posts
    427

    Default

    yea my dumb butt figured that out yesturday but thanks i apperciate the help. it is so nice having a carb that works like it is suppose to.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •