Results 1 to 7 of 7

Thread: Dana 44 question

  1. #1
    Join Date
    Oct 2009
    Location
    Australia
    Posts
    18

    Default Dana 44 question

    hey guys, how many spline axles does the Dana44's have in the Scout2?

    thanks.

  2. #2
    Join Date
    Apr 2009
    Location
    San Luis Obispo, California
    Posts
    283

    Default

    Rear or front 44? Rear is 30 front is... 27 at the hubs and 30 in the pumpkin? Im not sure on the front tho.. someone else will have to verify that or correct me.
    -72 Scout2 - SBC350 with RV camshaft, 4 speed manual Trans, D20 xfer case with CV drive shafts.
    -Dana 44 Detroit locker rear.
    -Dana 44 (out of a 75) Rebuilt /w trutrac limited slip frnt



    ~Conquest is not in our principles. It is inconsistent with our government.

    ~T.J.

  3. #3
    Join Date
    Oct 2009
    Location
    Houston, TX
    Posts
    8

    Default

    Quote Originally Posted by WarlordX View Post
    Rear or front 44? Rear is 30 front is... 27 at the hubs and 30 in the pumpkin? Im not sure on the front tho.. someone else will have to verify that or correct me.
    That is correct.
    1970 Scout 800A (just purchased)

    1985 CJ7 5.3/4L60E/D300TS

  4. #4
    Join Date
    Oct 2009
    Location
    Australia
    Posts
    18

    Default

    Quote Originally Posted by kickingprop View Post
    That is correct.

    ok, so both front and rear are 30 splines in the actual centre?

  5. #5
    Join Date
    Jul 2009
    Location
    Powell, Wyoming
    Posts
    12

    Default

    That is correct. Where the shafts actually engage the spider gears is 30 splines.

  6. #6
    Join Date
    Oct 2009
    Location
    Australia
    Posts
    18

    Default

    thanks for the information.

    here's another question, does anyone know the part numbers for the drive shaft uni-joints and possibly the front axle uni-joints? preferably the Spicer ones.
    thanks again

  7. #7
    Join Date
    Jul 2009
    Location
    Powell, Wyoming
    Posts
    12

    Default

    Can't think of the driveshaft joints numbers, but the axleshaft joints are 5-760X.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •